Resistance Welding Equipment

Product Details:

• Flash butt welding is a modern technique of joining mild steel, alloy steel and other dissimilar metals in various tubular or solid sections. Weld quality obtained is mechanically or metallurgically similar to the parent metal. Because of shorter weld times the process is suited for higher production than other conventional methods. No additional items such as rods or gas etc. Are required thus it is highly economical. Other features include (a) little or no end preparation (b) high accuracy of welding joints (c) high consistency of weld parameters.

• Welding of hss to en9 tools, tubular parts, bicycle and moped wheel rims, starter ring gears, window sections, table knives, construction steel bars upto 30 dia., bottom rings of cylinders, continuous coil strips.

• Fully hydraulically operated.
• Forced air cooled transformer having core of high grade silicon steel confirms to is 4804, part ii,
• Precision control on initial die opening. Flash off length, time, length and final die opening.
• Precision time delay circuit for upset current.
• Safety and sequential interlinks provided for prolonged trouble free tooling operation.
• Pre-heat and post heat cycles available as required.

• Cutting Tools
• Gear Rings /Steering Rings
• Chain Links
• Cycle Rims
• Fork Shifter

Product Details:

• Silencer
• M 80 Fork
• Fuel Tank
• Metal Strips

• Nut to Plate
• Shock Absorber
• Pipe to Rod
• Pipe to Nut
• Pipe to Plate
• Pipe to Washer

Product Details:

• Flash butt welding is a modern technique of joining mild steel, alloy steel and other dissimilar metals in various tubular or solid sections. Weld quality obtained is mechanically or metallurgically similar to the parent metal. Because of shorter weld times the process is suited for higher production than other conventional methods. No additional items such as rods or gas etc. Are required thus it is highly economical. Other features include (a) little or no end preparation (b) high accuracy of welding joints (c) high consistency of weld parameters.

• Welding of hss to en9 tools, tubular parts, bicycle and moped wheel rims, starter ring gears, window sections, table knives, construction steel bars upto 30 dia., bottom rings of cylinders, continuous coil strips.

• Fully hydraulically operated.
• Forced air cooled transformer having core of high grade silicon steel confirms to is 4804, part ii,
• Precision control on initial die opening. Flash off length, time, length and final die opening.
• Precision time delay circuit for upset current.
• Safety and sequential interlinks provided for prolonged trouble free tooling operation.
• Pre-heat and post heat cycles available as required.

• Cutting Tools
• Gear Rings /Steering Rings
• Chain Links
• Cycle Rims
• Fork Shifter

Product Details:

• Flash butt welding is a modern technique of joining mild steel, alloy steel and other dissimilar metals in various tubular or solid sections. Weld quality obtained is mechanically or metallurgically similar to the parent metal. Because of shorter weld times the process is suited for higher production than other conventional methods. No additional items such as rods or gas etc. Are required thus it is highly economical. Other features include (a) little or no end preparation (b) high accuracy of welding joints (c) high consistency of weld parameters.

• Welding of hss to en9 tools, tubular parts, bicycle and moped wheel rims, starter ring gears, window sections, table knives, construction steel bars upto 30 dia., bottom rings of cylinders, continuous coil strips.

• Fully hydraulically operated.
• Forced air cooled transformer having core of high grade silicon steel confirms to is 4804, part ii,
• Precision control on initial die opening. Flash off length, time, length and final die opening.
• Precision time delay circuit for upset current.
• Safety and sequential interlinks provided for prolonged trouble free tooling operation.
• Pre-heat and post heat cycles available as required.

• Cutting Tools
• Gear Rings /Steering Rings
• Chain Links
• Cycle Rims
• Fork Shifter

Product Details:

• Flash butt welding is a modern technique of joining mild steel, alloy steel and other dissimilar metals in various tubular or solid sections. Weld quality obtained is mechanically or metallurgically similar to the parent metal. Because of shorter weld times the process is suited for higher production than other conventional methods. No additional items such as rods or gas etc. Are required thus it is highly economical. Other features include (a) little or no end preparation (b) high accuracy of welding joints (c) high consistency of weld parameters.

• Welding of hss to en9 tools, tubular parts, bicycle and moped wheel rims, starter ring gears, window sections, table knives, construction steel bars upto 30 dia., bottom rings of cylinders, continuous coil strips.

• Fully hydraulically operated.
• Forced air cooled transformer having core of high grade silicon steel confirms to is 4804, part ii,
• Precision control on initial die opening. Flash off length, time, length and final die opening.
• Precision time delay circuit for upset current.
• Safety and sequential interlinks provided for prolonged trouble free tooling operation.
• Pre-heat and post heat cycles available as required.

• Cutting Tools
• Gear Rings /Steering Rings
• Chain Links
• Cycle Rims
• Fork Shifter

Product Details:

• Silencer
• M 80 Fork
• Fuel Tank
• Metal Strips

• Nut to Plate
• Shock Absorber
• Pipe to Rod
• Pipe to Nut
• Pipe to Plate
• Pipe to Washer

Product Details:

• Silencer
• M 80 Fork
• Fuel Tank
• Metal Strips

• Nut to Plate
• Shock Absorber
• Pipe to Rod
• Pipe to Nut
• Pipe to Plate
• Pipe to Washer

Product Details:

• Silencer
• M 80 Fork
• Fuel Tank
• Metal Strips

• Nut to Plate
• Shock Absorber
• Pipe to Rod
• Pipe to Nut
• Pipe to Plate
• Pipe to Washer

Product Details:

• Flash butt welding is a modern technique of joining mild steel, alloy steel and other dissimilar metals in various tubular or solid sections. Weld quality obtained is mechanically or metallurgically similar to the parent metal. Because of shorter weld times the process is suited for higher production than other conventional methods. No additional items such as rods or gas etc. Are required thus it is highly economical. Other features include (a) little or no end preparation (b) high accuracy of welding joints (c) high consistency of weld parameters.

• Welding of hss to en9 tools, tubular parts, bicycle and moped wheel rims, starter ring gears, window sections, table knives, construction steel bars upto 30 dia., bottom rings of cylinders, continuous coil strips.

• Fully hydraulically operated.
• Forced air cooled transformer having core of high grade silicon steel confirms to is 4804, part ii,
• Precision control on initial die opening. Flash off length, time, length and final die opening.
• Precision time delay circuit for upset current.
• Safety and sequential interlinks provided for prolonged trouble free tooling operation.
• Pre-heat and post heat cycles available as required.

• Cutting Tools
• Gear Rings /Steering Rings
• Chain Links
• Cycle Rims
• Fork Shifter

Product Details:

• Flash butt welding is a modern technique of joining mild steel, alloy steel and other dissimilar metals in various tubular or solid sections. Weld quality obtained is mechanically or metallurgically similar to the parent metal. Because of shorter weld times the process is suited for higher production than other conventional methods. No additional items such as rods or gas etc. Are required thus it is highly economical. Other features include (a) little or no end preparation (b) high accuracy of welding joints (c) high consistency of weld parameters.

• Welding of hss to en9 tools, tubular parts, bicycle and moped wheel rims, starter ring gears, window sections, table knives, construction steel bars upto 30 dia., bottom rings of cylinders, continuous coil strips.

• Fully hydraulically operated.
• Forced air cooled transformer having core of high grade silicon steel confirms to is 4804, part ii,
• Precision control on initial die opening. Flash off length, time, length and final die opening.
• Precision time delay circuit for upset current.
• Safety and sequential interlinks provided for prolonged trouble free tooling operation.
• Pre-heat and post heat cycles available as required.

• Cutting Tools
• Gear Rings /Steering Rings
• Chain Links
• Cycle Rims
• Fork Shifter

Product Details:

• Car, LCV, HCV, Buses, scooter, Auto Rikshaw Load Bodies and their Components etc.
• The portable (suspended) spot welders are designed and manufactured to industrial standards and are available from 50 KVA and upto 250 KVA.

• 50% duty cycle 'F' class insulation confirms to IS 4804 (I)

• 'X' or 'C' type water cooled pneumatically operated manufactured from cooper alloys for longer life.

• Synchronous solid state four function each capable of independent timing/amplitude setting plus stepless heat regulator
• The welder are supplied with kickless cable ,runway trolley and spring balancer

Product Details:

• Lot of Automobile components , Engineering hardware, white goods require to be spot welded.
• Multi spot welding machine is a composite technology machine to achieve higher production.
• One of the methods employ common transformer and welding in sequence one after another spot welding. It helps restrict connected power load.
• Similarly a higher transformer capacity is installed and no. of spot welding takes place simultaneously to further boost the production.
• The cage welding machine is one of the application in enviro industry to manufacturer wire filters(cages)
• It consists of feeding the , straight wires into the wire holders, wire rings (predetermined quantity) are placed in the centre limb.
• Initiating the cycle makes pair of electrode come down and weld two joints at a time. In sequence all the joints are welded. The power source (transformer) of smaller capacity (usually 30/ 50 KVA) is installed.
• The auto function makes cage more out by predetermined pitch by pneumatic cylinder.

Product Details:

• Weld quality obtained is mechanically and metallurgically similar to the parent metal . Because of shorter weld times the process is suited for higher production than other conventional methods .No additional material such as rods or gas etc. Are required , thus it is highly economical. The machine cycle involves heating ,upset butt welding followed by flash removal by special molybdenum alloyed inserts .

• Upset butt welding of copper rod, brass rod , high speed tools to carbon steel & others .

• Fully hydraulically operated & upset by high speed pneumatic thrust .
• Air cooled transformer having core of high grade silicon steel confirms to is 4804 ,part ii.
• Precision control on initial die opening upset length , time , length and final die opening .
• Precision time delay circuit for upset current .
• Safety and sequential interlinks provided for prolonged trouble free tooling operation .
• Highly rigid structure to counter the upset forces .
• Basic machine can be fitted with wide range of specifically designed to suit individual components .
• All the functions are through plc operation for precision settings and ease of control .

Product Details:

• All operational controls - air, water and solid state electronic - are machine mounted, for easy access, safe and simple maintenance.
• Weld sequence controller, sophisticated Quartz timer with squeeze, weld, hold and off timings with single/repeat cycle facility, weld timing being controlled by Thyristor circuit, heat controllable from 5% to 95%.
• Sturdy ram assembly permits high speed operation.

Product Details:

• All operational controls - air, water and solid state electronic - are machine mounted, for easy access, safe and simple maintenance.
• Weld sequence controller, sophisticated Quartz timer with squeeze, weld, hold and off timings with single/repeat cycle facility, weld timing being controlled by Thyristor circuit, heat controllable from 5% to 95%.

• Silencer
• M 80 Fork
• Fuel Tank
• Metal Strips

Product Details:

• Flash butt welding is a modern technique of joining mild steel, alloy steel and other dissimilar metals in various tubular or solid sections. Weld quality obtained is mechanically or metallurgically similar to the parent metal. Because of shorter weld times the process is suited for higher production than other conventional methods. No additional items such as rods or gas etc. Are required thus it is highly economical. Other features include (a) little or no end preparation (b) high accuracy of welding joints (c) high consistency of weld parameters.

• Welding of hss to en9 tools, tubular parts, bicycle and moped wheel rims, starter ring gears, window sections, table knives, construction steel bars upto 30 dia., bottom rings of cylinders, continuous coil strips.

• Fully hydraulically operated.
• Forced air cooled transformer having core of high grade silicon steel confirms to is 4804, part ii,
• Precision control on initial die opening. Flash off length, time, length and final die opening.
• Precision time delay circuit for upset current.
• Safety and sequential interlinks provided for prolonged trouble free tooling operation.
• Pre-heat and post heat cycles available as required.

• Cutting Tools
• Gear Rings /Steering Rings
• Chain Links
• Cycle Rims
• Fork Shifter

Product Details:

• Flash butt welding is a modern technique of joining mild steel, alloy steel and other dissimilar metals in various tubular or solid sections. Weld quality obtained is mechanically or metallurgically similar to the parent metal. Because of shorter weld times the process is suited for higher production than other conventional methods. No additional items such as rods or gas etc. Are required thus it is highly economical. Other features include (a) little or no end preparation (b) high accuracy of welding joints (c) high consistency of weld parameters.

• Welding of hss to en9 tools, tubular parts, bicycle and moped wheel rims, starter ring gears, window sections, table knives, construction steel bars upto 30 dia., bottom rings of cylinders, continuous coil strips.

• Fully hydraulically operated.
• Forced air cooled transformer having core of high grade silicon steel confirms to is 4804, part ii,
• Precision control on initial die opening. Flash off length, time, length and final die opening.
• Precision time delay circuit for upset current.
• Safety and sequential interlinks provided for prolonged trouble free tooling operation.
• Pre-heat and post heat cycles available as required.

• Cutting Tools
• Gear Rings /Steering Rings
• Chain Links
• Cycle Rims
• Fork Shifter

Product Details:

• Weld quality obtained is mechanically and metallurgically similar to the parent metal . Because of shorter weld times the process is suited for higher production than other conventional methods .No additional material such as rods or gas etc. Are required , thus it is highly economical. The machine cycle involves heating ,upset butt welding followed by flash removal by special molybdenum alloyed inserts .

• Upset butt welding of copper rod, brass rod , high speed tools to carbon steel & others .

• Fully hydraulically operated & upset by high speed pneumatic thrust .
• Air cooled transformer having core of high grade silicon steel confirms to is 4804 ,part ii.
• Precision control on initial die opening upset length , time , length and final die opening .
• Precision time delay circuit for upset current .
• Safety and sequential interlinks provided for prolonged trouble free tooling operation .
• Highly rigid structure to counter the upset forces .
• Basic machine can be fitted with wide range of specifically designed to suit individual components .
• All the functions are through plc operation for precision settings and ease of control

Product Details:

• Weld quality obtained is mechanically and metallurgically similar to the parent metal . Because of shorter weld times the process is suited for higher production than other conventional methods .No additional material such as rods or gas etc. Are required , thus it is highly economical. The machine cycle involves heating ,upset butt welding followed by flash removal by special molybdenum alloyed inserts .

• Upset butt welding of copper rod, brass rod , high speed tools to carbon steel & others .

• Fully hydraulically operated & upset by high speed pneumatic thrust .
• Air cooled transformer having core of high grade silicon steel confirms to is 4804 ,part ii.
• Precision control on initial die opening upset length , time , length and final die opening .
• Precision time delay circuit for upset current .
• Safety and sequential interlinks provided for prolonged trouble free tooling operation .
• Highly rigid structure to counter the upset forces .
• Basic machine can be fitted with wide range of specifically designed to suit individual components .
• All the functions are through plc operation for precision settings and ease of control

Product Details:

• Weld quality obtained is mechanically and metallurgically similar to the parent metal . Because of shorter weld times the process is suited for higher production than other conventional methods .No additional material such as rods or gas etc. Are required , thus it is highly economical. The machine cycle involves heating ,upset butt welding followed by flash removal by special molybdenum alloyed inserts .

• Upset butt welding of copper rod, brass rod , high speed tools to carbon steel & others .

• Fully hydraulically operated & upset by high speed pneumatic thrust .
• Air cooled transformer having core of high grade silicon steel confirms to is 4804 ,part ii.
• Precision control on initial die opening upset length , time , length and final die opening .
• Precision time delay circuit for upset current .
• Safety and sequential interlinks provided for prolonged trouble free tooling operation .
• Highly rigid structure to counter the upset forces .
• Basic machine can be fitted with wide range of specifically designed to suit individual components .
• All the functions are through plc operation for precision settings and ease of control

Product Details:

• Weld quality obtained is mechanically and metallurgically similar to the parent metal . Because of shorter weld times the process is suited for higher production than other conventional methods .No additional material such as rods or gas etc. Are required , thus it is highly economical. The machine cycle involves heating ,upset butt welding followed by flash removal by special molybdenum alloyed inserts .

• Upset butt welding of copper rod, brass rod , high speed tools to carbon steel & others .

• Fully hydraulically operated & upset by high speed pneumatic thrust .
• Air cooled transformer having core of high grade silicon steel confirms to is 4804 ,part ii.
• Precision control on initial die opening upset length , time , length and final die opening .
• Precision time delay circuit for upset current .
• Safety and sequential interlinks provided for prolonged trouble free tooling operation .
• Highly rigid structure to counter the upset forces .
• Basic machine can be fitted with wide range of specifically designed to suit individual components .
• All the functions are through plc operation for precision settings and ease of control

Product Details:

• All operational controls - air, water and solid state electronic - are machine mounted, for easy access, safe and simple maintenance.
• Weld sequence controller, sophisticated Quartz timer with squeeze, weld, hold and off timings with single/repeat cycle facility, weld timing being controlled by Thyristor circuit, heat controllable from 5% to 95%.
• Sturdy ram assembly permits high speed operation.

• Silencer
• M 80 Fork
• Fuel Tank
• Metal Strips

• Nut to Plate
• Shock Absorber
• Pipe to Rod
• Pipe to Nut
• Pipe to Plate

Product Details:

Seam Cum Projection Welding System For Fuel Tanks 250 Kva.

Application:

Fuel Tanks For Trucks, Lcv And Combination

Product Details:

• All operational controls - air, water and solid state electronic - are machine mounted, for easy access, safe and simple maintenance.
• Weld sequence controller, sophisticated Quartz timer with squeeze, weld, hold and off timings with single/repeat cycle facility, weld timing being controlled by Thyristor circuit, heat controllable from 5% to 95%.
• Sturdy ram assembly permits high speed operation.

Product Details:

• Thyristor controlled electronic timer with electronic heat control, to give heavy duty high speed operation, providing smooth, stepless and accurate adjustment of the welding current.
• High quality roller bearings carrying the roller shafts, guaranteed longer-life of the roller heads.
• Leak proof joints at much lower costs than conventional welding.

Product Details:

Flash Butt Welding Machine For Torsteel Bars  100 Kva For Tmt Bars Upto 25 mm With Grinder And Annealing.

Product Details:

• All operational controls - air, water and solid state electronic - are machine mounted, for easy access, safe and simple maintenance.
• Weld sequence controller, sophisticated Quartz timer with squeeze, weld, hold and off timings with single/repeat cycle facility, weld timing being controlled by Thyristor circuit, heat controllable from 5% to 95%.
• Sturdy ram assembly permits high speed operation.