Our range of products include electric resistance heater, electrical resistance heaters, electric resistance heater for rods, auto u bolt heating and forming machines and roller bar heating and quenching machine.
The Electric Resistance Heating is the least expensive way to change electricity into heat in any metallic object. In a furnace, the entire furnace has to be heated, the elements have to be heated, which in-turn many times heat a muffle which in turn heats the part in which heat is desired. Resistance heating is a more direct method of producing heat only in the object in which heat is needed.
Applications
Just a few of the applications would be; wire drawing, extruding, warm or hot heading, brazing, forging, upsetting, roll parts, heat treating, heating strip stock for shearing, for forming, drawing and rolling, soldering and general purpose heating.
Technical Data:
mary/ Power Supply
MODEL
UNITS
TBH-25
TBH-50
TBH-100
TBH-250
Supply Voltage at 1 ph. 50 Hz
V
415
415
415
415
Input power at Max. current
KVA
25
50
100
250
Switch fuse
A
80
150
300
650
Current taps
No.
6
6
8
8
Duty cycle
%
100
100
100
100
ADVANTAGES
Lower energy consumption.
Immediate start of heating operation.
Low scale formation.
No decarburization of the skin.
Good soaking of the bars.
Compact design, smaller outer dimensions.
No foundations required.
Shorter heating times with high temperature precision.
Electric Resistance Heater Machine 200 Kva For End / Centre Heating For Leaf Springs For End Coiling And Centre Punching Used For Suspension In Auto Industries.
Heating with 3 phase Dc upto 300 Kva upto 1000??C and lifting and dropping on conveyor chain for quenching in oil tank for heat treatment. Can also be used for heating & bending.
Heating with 3 phase Dc upto 300 Kva upto 1000??C and lifting and dropping on conveyor chain for quenching in oil tank for heat treatment. Can also be used for heating & bending.
